A fan can save the day when the heat decides to visit you with full force, especially during summer. But hanging this fan on the ceiling allows it to circulate the room better than when it is placed on the floor.
A ceiling fan can also aid the aesthetic view of the room, depending on the structure and design.
In this article, we will look at the basic things you need to know before installing a ceiling fan; the permit, the amp (amperage) breaker, and the weight of the ceiling fan.
Do I Need A Permit To Install A Ceiling Fan?
You will need a permit to install a ceiling fan, especially if it requires you to run the electrical wiring. It is been mandated by the government.
The purpose is to certify that a professional is carrying out the work and that all precautions have been taken. It’s for your safety.
To be on the safe side, get a permit – you don’t want the ceiling falling on you.
Do Ceiling Fans Require A Wall Switch?
A wall switch is often attached to the light switch and might need a bit of electrical wiring. It is not compulsory to use a wall switch, but it is the most reliable means of controlling the ceiling fan.
A wall switch is the commonest means of controlling a ceiling fan. It is usually at a very accessible part of the room, close the door.
It may be fixed close to the light switch; so when you walk into the room, you can switch both on at the same time.
When making this decision on the use, the location, and the type of the wall switch, you can also discuss it with your electrician to make a well-informed decision. This is because a lot of factors are involved.
You have a choice to pick the means of controlling your ceiling fan that suits you the best. The other two options include remote control and a pull cord.
What Amp Breaker For A Ceiling Fan?
The amp breaker needed for your ceiling fan is a necessary concern. This is because it helps to ensure your fan is protected from unusually high currents, thereby avoiding damage.
However, a ceiling fan does not draw as much current as a cooling device, so a low amp breaker will do the job.
You can install your ceiling fan on a 15 or 20 amp circuit breaker.
A ceiling fan does not require much current, and the quantity of current it uses depends on the type and the power setting of the fan.
With a 15 amp circuit breaker, you can safely use your ceiling fan and even share it with other appliances.
Can You Turn On The Ceiling Fan Without A Remote?
The remote provides the flexibility of controlling the fan from any corner of the room. You can switch on or off the fan from the comfort of your bed.
Although, the remote control is not the only means of controlling a ceiling fan.
Without a remote, you can still turn on the ceiling fan with a pull cord.
Usually, your ceiling fan will come with a pull cord. You need to buy an extension cord from a hardware store and join it. This length is to make it convenient for you.
Also, you can turn on your ceiling fan without a remote by:
● Installing a wall switch –
A wall switch is another option you can use instead of a remote. It is a traditional method of controlling a ceiling fan. A switch is placed on the wall with a control dial to switch on and off and control the fan’s speed. The control panel is easy to handle.
● Making use of your mobile phone –
The world has become a digital place, and technology has made everything much easier. There are mobile apps online that you can install on your phone to control your ceiling fan.
● Third-party products –
With several online products today, you can control almost any appliance in your home.
With these products, all you need to do is connect it with your mobile phone, and you control your ceiling fan from there.
Technological innovations have made life easier, and you’re not restricted to just a remote to control your fan.
How Fast Do Ceiling Fans Spin Mph?
The speed of your ceiling fan is also another quality you might want to consider when getting one.
How fast it runs can be an added advantage, especially on days when you desire its cooling effect more quickly.
The speed of your ceiling fan depends on the size, the type, the motor, and the number of blades it has.
A 48-inch ceiling fan can move at the speed of about 100 mph, while a 52-inch one moves at about 84 mph.
These figures imply that the smaller the fan, the more wind it can harness and spread across the room.
Also, you should note that the faster the fan moves, the more noise it generates while working.
How Much Weight Can A Ceiling Fan Take?
Your ceiling fan was not designed to carry additional weights, but you might want to add some extras in some cases. You should, however, watch out when hanging extra materials on a fan.
The weight your ceiling fan can handle depends on what its box is made of.
An average ceiling fan of 42 inches can hold about 50 pounds of weight.
There is a risk of the fan falling if it carries more weight than it can hold. The weight of the fan itself and the extra weight all act downward.
It is better to hang other materials directly on the ceiling than on your ceiling fan. However, you can add light decorations like ribbons, mistletoe, and balloons without any fear.
To hang anything up on the ceiling fan, use your discretion to compare the weight.
Summary
The ceiling fan works to keep us cool and adds an extra design to the room. You can enjoy this cooling device for its simplicity and average power consumption.
However, to ensure your safety, you should not do its installation. You will need a permit to make sure a professional is responsible for the installation.
You can also determine the type of ceiling fan you want by considering its power consumption, weight, outlook, and speed.
References:
https://www.trulia.com/blog/8-diy-projects-that-surprise-require-permits/
https://homeapricot.com/how-many-amps-does-ceiling-fan-use/
https://hvacseer.com/how-to-turn-on-ceiling-fan-without-remote/
https://homeapricot.com/how-much-weight-can-ceiling-fan-hold/
