Plastic kitchen sinks are durable kitchen sinks that can begin to seem dingy, faded, or obsolete long before they are ready to be replaced.
This is a particularly good alternative for homeowners seeking a quick upgrade before showing or selling their house, as it is non-invasive and does not necessitate any plumbing changes.
Here’s If Can You Paint A Plastic Kitchen Sink
Ideally, you can apply paint to your plastic kitchen sink to restore it to its glory. Apply paint to the surface of your bathroom or kitchen sink to refinish it and make it seem new again.
What Paint Can You Use On A Plastic Sink?
The best paints to use on your plastic kitchen sink are Kyron Fusion for Plastic, Rust-Oleum Paint for Plastic, and EP-Acrylic paint.
Most hard plastics are compatible with EP-Acrylic paint, Krylon Fusion for Plastic, and Rust-Oleum Paint for Plastic, so they should work whether your sink is acrylic, polypropylene, fiberglass composite, or any of the other plastics that are commonly found in laundry sinks these days.
Because Krylon and Rust-plastic Oleum’s paints are only available in spray cans, dealing with overspray is crucial.
Other than the sink, you’d need to completely cover all surfaces where paint droplets could land. Remove the paint from the walls, the floor, the cabinets, and even the drain trim and faucet. Wear goggles and a mask.
Rust-Oleum Specialty Plastic Primer and EP-Acrylic paint, brush-on paints that adhere to plastic and allow you to use regular paint as a topcoat, are both less messy options.
Factors to consider when selecting your Plastic Kitchen Sink’s Paint
- To properly adhere to the surface, the ideal paint should have a high adhesive capacity. Your paint is more prone to chip if you don’t have this talent, which means you’ll have to make more frequent repairs.
- Use a paint that only takes a few minutes to dry and cure. It will take fifteen to thirty minutes for the normal ones to completely dry. To avoid being caught off guard, consider how long it will take for the paint to cure once you’ve applied it.
- Versatility is an important feature to seek in any paint. The correct paint should be able to be applied to any surface with ease. It should also be resistant to corrosion and water.
What Do You Need To Paint Your Plastic Kitchen Sink?
Typically, you will need soap, a rag, painter’s tape, acrylic paint, and a paintbrush.
The most important thing for you to do is gather everything you’ll need. So, to make things easier for you here is a compiled list of everything you’ll need:
- Soap – Soap is required to remove the tenacious grease from your sink.
- Rag – A rag can also be used to remove stains from the sink.
- Painter’s tape – this helpful tool will help seal off all the waterways in your sink, preventing it from clogging.
- Acrylic paint – the paint will change the appearance of your sink.
- Paintbrush – A decent old-fashioned paintbrush is required to apply the paint.
How To Paint A Plastic Kitchen Sink
Step #1 – Clean the Sink Thoroughly
Thoroughly clean the sink. Use a powerful cleanser designed to remove oil, soap scum, and mildew. Clean every inch of the sink to ensure that nothing gets in the way of the paintwork. Rinse and dry the sink thoroughly.
Step #2 – Smoothen the Plastic Sink
Using a palm sander and sandpaper, rough up the surface of the sink. The palm sander vibrates gently, which aids in roughening up the plastic without leaving deep scratches on its surface. Remove any loose debris from the sink and thoroughly dry it.
Step #3 – Tape out the Necessary Parts
To protect the sink’s drain, edge, and any faucets that come into touch with its surface from the paint, tape them off.
Step #4 – Paint the Sink
Using a paintbrush, apply EP-Acrylic paint on the sink. This unique paint will bind with the sink’s original plastic to create a smooth, glossy surface. Apply at least two coats, allowing the paint to dry completely in between. Allow 24 to 48 hours for the paint to set before utilizing your new sink.
Sealing the Paint After Painting
A clear acrylic sealer adds an extra layer of protection to your freshly painted plastic surface.
You don’t have to use the sealer, but it can help the results last longer, especially if you’re painting something that will be exposed to the elements. To make the job easier, you can use a spray sealer.
Before applying the sealant, let the paint dry completely. Spray it on with the same consistency, smoothness, and overlapping sprays that you used for the paint.
One coat of sealer is normally sufficient, but if the object is subjected to extreme circumstances, you may need to apply more. Allow each layer to thoroughly dry before applying the next.
How Do You Remove Paint From A Plastic Sink?
- Begin by sprinkling WD-40 on the paint splash.
- Allow a few moments for the WD-40 to take effect.
- When the paint begins to melt, try to remove the splatter using a plastic ice scraper.
- If the paint is flush with the surface and won’t come off with a scraper, liberally use WD-40.
Additional Advice and Suggestions
- Older paintings may take a bit longer to remove, but the procedure above will work for them as well.
- Because WD-40 does not dry out, you can apply a thick coat and leave it to soak overnight for extremely persistent paint splatter. This should soften the paint, allowing it to be removed more easily.
- If WD-40 fails to remove the paint, you may need to use a paint remover. Examine the labels carefully, or ask a hardware shop employee for assistance in locating one that will safely clean the plastic surface.
- Other cleaning agents that have been useful in removing stains and marks from plastic kitchen sinks include soft scrub and Bar Keeper’s Friend. They’re minimally abrasive and suitable for a wide range of surfaces.
- Consider it a sign of character and usage if the paint won’t budge. Kitchen sinks are designed to handle all of the filthy stuff that we wouldn’t let touch any other house surfaces.
- Rub the area with a cotton ball or soft cloth dampened with rubbing alcohol if it’s latex paint. It will sever the paint and make it possible to remove it.
Should You Spray Paint Your Plastic Kitchen Sink?.
Yes, you can spray paint your plastic kitchen sink, however, however, this is not recommended because kitchen sinks are not like walls.
Because they aren’t all that plain, it can be difficult to get paint on those edgy sinks uniformly.
Still, spray paints are quick and easy to apply. Plastic Krylon Fusion and plastic Rust-Oleum Paint are recommended. These paints should attach to the majority of plastic components and be effective on composite fiberglass, polypropylene, and acrylic.
How do you Spray Paint Your Plastic Kitchen Sink?
Here is how to spray paint your plastic kitchen sink:
- Shake the spray paint before spraying it over the sink.
- The spray paint can then be held at least 10 to 16 inches away from the sink.
- Then, just press the spray paint handle to cover the entire sink.
Bottom Line
To summarize, you can paint your plastic kitchen sink to update its appearance while also improving the user experience. As a result, you should get the appropriate paint for the job.
The correct product should give it a high-gloss, long-lasting finish. Plastic sinks are easily painted at home. Simply remove all hardware and clean the sink. Scuff the sink with sandpaper and remove the sheen with acetone.
